Which third-party cameras does Mech-Vision support?

The third-party cameras that can be connected to Mech-Vision are listed in the table below.

Item	Camera type	Related Step	Recommended client version	Note
Hikvision	Camera 2D	Camera 2D	MVS 3.3.1	Related driver should be installed. The “camera2d_h” plugin should be installed in Mech-Vision.
DAHENG	Camera 2D	Camera 2D	2.7.2305.8081	The “camera2d_plugin” plugin should be installed in Mech-Vision.
iRayple	Camera 2D	Camera 2D	2.3.0_Build20210730	The “camera2d_plugin” plugin should be installed in Mech-Vision.
Cameras supporting eBUS	Camera 2D	Camera 2D	eBUS Player 6.2.8	The “camera2d_plugin” plugin should be installed in Mech-Vision. The images captured by the camera have a "Pleora" watermark, which does not affect normal functionality. To remove it, you would need to purchase the runtime license for cameras supporting eBUS. If the camera uses the GigE protocol, you need to purchase a gev-rx license. If the camera uses the USB protocol, you need to purchase a u3v-rx license. If you do not want to purchase the runtime license for cameras supporting eBUS, you can try to use the Calc Results by Python Step to capture images by calling the Python interface of third-party cameras.
LMI	Laser profiler	Capture Images from Camera		The “camera3d_plugin” plugin should be installed in Mech-Vision.
SSZN	Laser profiler	3D Laser Profiler	V3.3.2	The “camera3d_plugin” plugin should be installed in Mech-Vision.

Item

Camera type

Related Step

Recommended client version

Note

Hikvision

Camera 2D

MVS 3.3.1

DAHENG

Camera 2D

2.7.2305.8081

The “camera2d_plugin” plugin should be installed in Mech-Vision.

iRayple

Camera 2D

2.3.0_Build20210730

The “camera2d_plugin” plugin should be installed in Mech-Vision.

Cameras supporting eBUS

Camera 2D

eBUS Player 6.2.8

The “camera2d_plugin” plugin should be installed in Mech-Vision.
The images captured by the camera have a "Pleora" watermark, which does not affect normal functionality. To remove it, you would need to purchase the runtime license for cameras supporting eBUS.
- If the camera uses the GigE protocol, you need to purchase a gev-rx license.
- If the camera uses the USB protocol, you need to purchase a u3v-rx license.
- If you do not want to purchase the runtime license for cameras supporting eBUS, you can try to use the Calc Results by Python Step to capture images by calling the Python interface of third-party cameras.

LMI

Laser profiler

Capture Images from Camera

The “camera3d_plugin” plugin should be installed in Mech-Vision.

SSZN

Laser profiler

3D Laser Profiler

V3.3.2

The “camera3d_plugin” plugin should be installed in Mech-Vision.