Measure Distances Circles to Segments

Function

This Step is used to measure the distances from circles to line segments.

Hint

Before using this Step, please refer to Getting Started with Measurememt Mode to learn about basics of Measurement Mode.

Sample Application

../../../../../_images/sample_application6.png

Connect Read Images V2, Measure Circles, Measure Longest Line Segment, and Measure Distances Circles to Segments to measure the distance from circles to line segments.

Connect Steps

  1. Click on Measure Circles , go to the Step Input Source Selection panel, and then select Read Images V2_1_Color Image as Input 1 (Color Image).

  2. Click on Measure Longest Line Segment , go to the Step Input Source Selection panel, and then select Read Images V2_1_Color Image as Input 1 (Color Image).

  3. Click on Measure Distances Circles to Segments, go to the Step Input Source Selection panel, and then select Measure Circles_1_Circles as Input 2 (Circles) and Measure Longest Line Segment_1_Line Segments as Input 3 (Line Segments).

Configure parameters and read the result

Note

Please prepare color image(s) that contain object(s) to be measured in advance.

  • Configure in Read Images V2

    Click on the Step, and configure the Imgae Source, Image File/Folder Path, and other parameters in the Step Parameters panel. After completeing the configuration, click on Run to run the project.

  • Configure in Measure Circles

    Click on the Step, and select an ROI in the sketchpad area.
    ../../../../../_images/circle_11.png

  • Configure in Measure Longest Line Segment

    Click on the Step, and select an ROI in the sketchpad area.
    ../../../../../_images/segment_11.png

  • Configure in Measure Distances Circles to Segments

    Click on the Step, the distance (in pixels) from the center of the circle to the line segment by default will be displayed in the sketchpad area.
    ../../../../../_images/measure_result5.png
    You can switch the Distance Mode to Nearest in the Step Parameters panel. Run the project again to measure the nearest distance from the circle to the line segment.
    ../../../../../_images/measure_result_11.png

  • The measurement result will be displayed in Measurement Output and Result View panels as well. You can also set the LSL (lower specification limit) and USL (upper specification limit) to check whether the measurement conforms to the specification.