Configure UDP Communication

This section introduces how to configure the UDP communication. Before configuration, please confirm that you have already selected the robot and entered the Communication Option interface.

../../../_images/udp.png

  1. On the Communication Option interface, set the Set Interface Type parameter to Standard Interface, set the Protocol parameter to UDP Server, and set the data transmission format according to the HEX and ASCII that the robot supports.

  2. For the Host IP address parameter, enter the port number.

    Note

    The port number should be set to 50000 or larger.

  3. (Optional) Select Auto enable interface service when opening solution. When the solution is opened, you do not need to start the interface service manually.

  4. Click the Apply button.

  5. Start the interface service.

Next, you need to complete the remaining standard interface configuration according to the used robot or PLC.