No Vision Result When Mech-Viz Was Used to Control the Robot

Symptom:

Mech-Vision had output the vision result, but the robot did not receive it.

Affected Software Versions:

All Mech-Viz versions

Possible Cause:

• Auto-load is not set for the Mech-Vision project.

• Auto-load is not set for the Mech-Viz project.

• Steps Vision Move and Vision Move did not read the correct Mech-Vision project.

• Mech-Center was not running.

• External signals were abnormal.

Solution:

Follow these steps to fix the issue:

1. Start Mech-Vision, right-click the project and select the Autoload Project checkbox.

2. Start Mech-Viz, right-click the project and select the Autoload Project checkbox.

3. In Steps Vision Move and Vision Move of the Mech-Viz project, confirm that the Vision Name parameter has been set to the correct Mech-Vision project.

4. Start the Mech-Center software.

5. Check external signals.