Parameters for 2D Image

The parameters in the 2D Parameters category affect the quality of the 2D image.

The general criteria for a good 2D image:

• Not over-exposed.

• Not under-exposed.

• The details that you need are visible and clear enough.

  Note

  Depending on your project needs, you may not need to ensure that the entire 2D image has the right brightness. As long as the parts needed for subsequent processes (such as deep learning inference and template matching) are clear enough for the processing, it is acceptable for irrelevant parts to be over- or under-exposed.

Note

Before proceeding, make sure you are familiar with the components and functions of the parameter panel.

The Beginner level parameters are basic parameters, and the additional parameters in Expert level are advanced parameters.

It is recommended to adjust the basic parameters first. If the quality of the 2D image is still unsatisfactory, adjust the advanced parameters.

Basic Parameters for 2D Image

Depending on what camera is connected, you may see different parameters in the 2D Parameters category, and the options therein also differ.

• If you are connected to a LSR or DEEP series camera: Color Camera Exposure Mode and Monochrome Camera Exposure Mode are displayed.

• If you are connected to a camera from another series: Exposure Mode is displayed.

  Note

  For the LSR and DEEP series:

  • Color Camera Exposure Mode affects the color 2D camera. The 2D image is obtained by this camera.

  • Monochrome Camera Exposure Mode affects the monochrome 2D cameras. The images obtained by these cameras are used for checking camera intrinsic parameters, setting the ROI, and calibrating camera extrinsic parameters with Mech-Vision’s Camera Calibration.

The following table summarizes the options available for each of the above parameters.

	Exposure Mode	Color Camera Exposure Mode	Monochrome Camera Exposure Mode
Timed
Auto
HDR
Flash

The following table summarizes the suitable scenarios for each exposure mode option.

Exposure mode	Suitable scenario
Timed	Usually used in stable lighting conditions.
Auto	Usually used in varying lighting conditions.
HDR	Usually used for objects with various colors or textures.
Flash	Usually used in dark environments.

The exposure mode option selected determines what other parameters are displayed in the 2D Parameters category. The following sections explain the parameters corresponding to each option.

Timed Exposure Mode

With the Timed option, you can set a single exposure time for capturing the image.

• For Exposure Mode and Color Camera Exposure Mode: adjust the value of Exposure Time.

• For Monochrome Camera Exposure Mode: adjust the value of Monochrome Camera Exposure Time.

Exposure Time/Monochrome Camera Exposure Time

The value of Exposure Time/Monochrome Camera Exposure Time affects the brightness of the image.

Usually, long exposure time is used in dark environments, and short exposure time is used in bright environments.

• 2D images captured with different Exposure Time values (all other conditions identical):

  30 ms	120 ms	220 ms

• Monochrome images captured with different Monochrome Camera Exposure Time values (all other conditions identical):

  10 ms	40 ms	80 ms

Auto Exposure Mode

With the Auto option, the exposure time is automatically adjusted based on your settings for Auto-Exposure ROI and Gray Value.

Auto-Exposure ROI

If an auto-exposure ROI is set, the exposure time is adjusted based on the lighting, object colors, etc., in the selected region.

Note

If you do not set an auto-exposure ROI, the entire camera FOV is taken into consideration during exposure time adjustment.

To set an auto-exposure ROI:

1. Double-click Edit next to Auto-Exposure ROI.

2. Drag the cursor on the image to select an auto-exposure ROI. Adjust the size and position of the selection box if needed.

   Hint

   Please select the area where the target objects are located and avoid including irrelevant objects as much as possible.

3. Click Apply to finish setting the auto-exposure ROI.

   Hint

   Click Clear to delete the set auto-exposure ROI.

4. Click or to perform image capturing. The brightness of the 2D image is automatically adjusted based on the auto-exposure ROI.

• 2D images captured with different auto-exposure ROIs (all other conditions identical):

  Auto-Exposure ROI	2D Image

Gray Value

This parameter affects the brightness of the 2D image:

• Increasing the parameter value makes the 2D image brighter.

• Decreasing the parameter value makes the 2D image darker.

It is recommended to set an auto-exposure ROI first. Adjust this parameter if the brightness of the 2D image is still unsatisfactory.

• 2D images captured with different Gray Value values (all other conditions identical):

  50	100	150

Note

• For monochrome images, this parameter sets the intensity of the image.

• For color images, this parameter sets the intensity of each color channel.

HDR Exposure Mode

With the HDR option, you can set multiple exposure times, and the captured images are merged to generate a 2D image that retains more details in the highlights and shadows.

The parameters available with the HDR option are Exposure Sequence and Tone Mapping.

Exposure Sequence

Set an exposure sequence of multiple exposure times, and the captured images are merged to generate a 2D image that retains more details in the highlights and shadows.

To set a exposure sequence:

1. Double-click Edit next to Exposure Sequence.

2. Click + to add an exposure time. Then, adjust the duration of this exposure time.

   Hint

   To delete an exposure time, select it and click -.

3. Click Apply to save the exposure sequence.

Hint

• Click Reset to delete all the set exposure times.

• Click Cancel to exit the window without saving the changes.

Note

If you add only one exposure time to the sequence, it is the same as selecting the Timed mode.

• 2D images captured with different exposure sequences (all other conditions identical):

  700 ms	500 ms and 900 ms	500 ms, 700 ms and 900 ms

• For comparison: 2D images captured with single exposure times (all other conditions identical):

  500 ms	700 ms	900 ms

Tone Mapping

Enabling Tone Mapping can make the colors of the image look more natural. If the 2D image appears very different from the actual objects, please enable this function.

• 2D images captured with Tone Mapping disabled and enabled (all other conditions identical):

  Disabled	Enabled

Flash Exposure Mode

With the Flash option, the projector is used to project supplemental light.

• 2D images obtained with the Flash exposure mode and Timed exposure mode (all other conditions identical):

  Flash	Timed

The brightness of the 2D image obtained with the Flash exposure mode can be adjusted by Exposure Time in the 3D Parameters Category.

• 2D images obtained with different Exposure Time values (all other conditions identical):

  4 ms	10 ms	15 ms

Advanced Parameters for 2D Image

The Gain parameter in the 3D Parameters category also affects the 2D image. This parameter is available at Expert and Guru visibility level.

Gain

This parameter belongs to the 3D Parameters category. It affects the brightness of the captured image. At the same time, more noise is introduced.

The higher the value of Gain, the brighter the captured image, and the more noise introduced.

Note

If adjusting exposure mode/time does not produce the desired image brightness, you can increase the value of Gain. However, this introduces more noise to the 2D image.

• 2D images captured with different Gain values (all other conditions identical):

  0	5	10

---

Hint

For models with color 2D cameras, the color of the 2D image may differ significantly from that of the actual objects. In such cases, you can adjust the white balance setting of the color 2D camera. For detailed information, please refer to Auto White Balance.

Continue reading for descriptions of the basic parameters for the depth map and point cloud.