Safety Instructions¶

To ensure safe use, please do not use the product before reading this manual and becoming familiar with the correct usage. Improper use and maintenance may damage the product or cause other hazards. Mech-Mind shall not be liable for any injury or damage brought upon the user or any third party due to improper use and maintenance.
Following the instructions and warnings in this manual can lower risks, but can not totally eliminate all risks.
Every step has been inspected during the drafting of this user manual. Please do not hesitate to contact Mech-Mind if you find any problems or mistakes in the manual.
This product is to be mounted, connected, used and maintained by trained adults only. To ensure safe operation, the product should be transported, stored, mounted, tested, operated, and maintained properly.
Laser is hazardous; please be acquired of hazard prevention before using the camera.

Precautions for Mounting and Using the Camera¶

It is PROHIBITED to place any explosive or flammable substances near the camera. Do not expose the camera to open fire or high temperature.
Do not throw, drop, or collide the camera with other objects. The camera may be damaged by strong shock or vibration. It is PROHIBITED to modify or fabricate the camera in any form. Do not repair or disassemble the camera by yourself. Damage caused by modifications will void the warranty.
Do not allow any foreign object, such as metal pieces, dust, paper, wood chips, etc., to enter the camera. Failure to do so may lead to fire, electric shock, malfunction, etc.
This product should only be mounted, used, cleaned, or maintained by adults. This product should be mounted by trained personnel. This product may include detachable components, which should be kept away from children to avoid harm caused by swallowing and misuse.
Do not use the camera in extremely high or low temperature. The operating temperature range of the laser cameras is -10–45 °C.
Please use the camera indoors.
Please use the camera at elevations below 4,000 meters.
Do not stare into the light beam when using the camera.

Before using, please check the camera carefully for damage, water damage, suspicious odor, smoke, loose or damaged bolts, etc., and make sure that the camera is in proper working conditions. If any of the above abnormalities occurs, please disconnect the power and stop using immediately.

Do not use if the power port, adapter/DIN rail power supply, or power socket is wet.
Do not heat or put the adapter/DIN rail power supply and power cable in fire.
For power, please use a 24 V isolated adapter with an output power of at least 90 W or a 24 V isolated DIN rail power supply. Please use the specified voltage. Failure to do so may lead to fire, electric shock, malfunction, etc. The power cable and ethernet cable should be properly grounded. It is recommended to use the isolated adapter or DIN rail power supply provided by our company.
Use copper conductors only.

Operator should wear suitable laser safety eyewear to avoid damage caused by direct eye exposure (applicable for class 3R).
Do not look into the laser beam or the reflected laser beam directly.
Do not look into the laser beam with optical instruments. Failure to do so may lead to eye injuries.
Do not direct the laser at other people.
The laser beam must be lower or higher than and never at eye level.
Be cautious of the path of the laser beam. If there is a possibility that personnel may be exposed to the specular or diffuse reflections, block the beam by installing a protective enclosure.
Do not enter the areas that the laser/reflected laser output reaches.
Do not place any metal object in the path of the laser beam.

Please comply with local laws and regulations when disposing the camera to avoid polluting the environment. Please do not dispose the camera irresponsibly. Improper disposal may pollute the environment.
The pollution degree of the camera is 3.

Note

This icon indicates that failure to follow the instruction may lead to injury or death.