Mounting the Camera

Hint

  • Preparation beforehand: wrench, and bolts if the ones included are not suitable.

  • The following instructions are illustrated with Log S.

Mount through Threaded Holes

Use the wrench to pre-tighten the bolts in the sequence specified in the figure below, and then fully tighten all the bolts.

../../_images/mount_camera.png

Hint

Please disassemble the L shaped bracket(s) before mounting.

  • Types of L shaped bracket:

    As shown below.

    ../../_images/l_type.png
  • Disassemble the L shaped bracket(s):

    Use the wrench to disassemble the L shaped bracket(s), as shown below.

    ../../_images/dismount_l.png

Mount through the L Shaped Bracket(s)

Use the wrench to tighten the two bolts, as shown below.

../../_images/mount_camera_2.png

Hint

The L shaped bracket(s) is attached to the back of the camera when packaged.