Classify

Description

This Step is used before or after Vision Look to choose different branches according to the workobject labels identified by Mech-Vision.

Usage Scenario

This Step is used to classify the workobject labels identified by Mech-Vision.

• Before “Vision Move”:

  The default picking process: Identify the workobject → Select and operate on different branches according object’s labels → Pick workobjects with the label

  Example: Change the gripper for different workobjects.

• After “Vision Move”:

  The default picking process: Identify the object → Pick the object → Operate differently according to the types of workobjects

  Example: Use the same gripper to pick and place workobjects into different bins after classification.

Parameters

Basic Non-Move

See General Parameters of Non-Move Steps.

Get Label from “Update Held Workobject”

Selected:

Description: An Update Held Workobject Step should be used before this Step, and this Step can acquire the label information of the currently picked workobject and then perform operations according to the classification.

Usage Scenario: The label information of the detected workobjects cannot be acquired directly due to the overlapped workpieces or other reasons, and therefore the held workpieces should be re-classified and then corresponding labels can be output.

Not selected:

The default setting.

Description: Use the object labels detected by Mech-Vision. Please select the corresponding Vision Move Step for Classify before “Vision Move”.

Load Labels & Add a label

Load Labels

Add multiple labels to Unused Labels at once.

Click Load Lebels and select a JSON file with multiple labels, as shown below. After that, all label files will be added to Unused Labels, and all the previous labels in both the Unused Labels and the Used Labels will be deleted.

Add a Label

Add a label named unnamed_label to Unused Labels. You can double-click the label to re-name it.

Label list

The label list includes Unused Labels and the Used Labels. You can shift the label’s place between the two spaces by clicking or .

The Used Labels will appear at the exit port of this Step.

There will be a label named Other to filter out labels that are not in the Used Labels space.