mmind::eye::brightness_settings::LaserPower Class Reference

Static Public Attributes
static constexpr const char *	name = "LaserPower"
static constexpr const char *	description
static constexpr Parameter::Type	type = Parameter::Type::_Int

Detailed Description

Definition at line 180 of file RawImageParameters.h.

Member Data Documentation

description

constexpr const char* mmind::eye::brightness_settings::LaserPower::description

staticconstexpr

Initial value:

=
        "Set the power of the emitted laser, which affects the brightness of the laser lines in "
        "the raw image.\nIf the object is reflective or light-colored, you can decrease this "
        "parameter to reduce the brightness of the laser lines. If the object is unreflective or "
        "dark-colored, you can increase this parameter to enhance the brightness of the laser "
        "lines.\nNote: Even at the same power level, the brightness of the laser emitted by each "
        "device differs. Please adjust this parameter based on the actual condition of each "
        "device."

Definition at line 185 of file RawImageParameters.h.

name

constexpr const char* mmind::eye::brightness_settings::LaserPower::name = "LaserPower"

staticconstexpr

Definition at line 183 of file RawImageParameters.h.

type

constexpr Parameter::Type mmind::eye::brightness_settings::LaserPower::type = Parameter::Type::_Int

staticconstexpr

Definition at line 194 of file RawImageParameters.h.

---

The documentation for this class was generated from the following file:

• include/profiler/profiler/parameters/RawImageParameters.h