Here are the classes, structs, unions and interfaces with brief descriptions:

[detail level 12345]

▼Nmmind
▼Napi
►Nlnxapi
CMechEyeDevice	Interface that is used to connect the LNX Mech-Eye device and access basic information of the device
CCameraIntri	This struct defines camera intrinsic parameters
CDepthRange	This struct defines the depth range
CDeviceIntri	This struct defines device intrinsic parameters, including texture camera and depth camera
CDeviceResolution	This struct defines camera map resolution
CDeviceTemperature	This struct describes the device temperature information
CElementColor	Element in ColorMap
CElementDepth	Element in DepthMap
CElementPointXYZ	Element in PointXYZMap
CElementPointXYZBGR	Element in PointXYZBGRMap
CErrorStatus	This enumeration defines the types of errors
CFrame	Definition of data structure in device capturing image
CHandeyeCalibrationSettings
CLaserSettings
CLineBatch
CMechEyeDevice	Interface that is used to connect the Mech-Eye Industrial 3D Camera and access basic information of the device
CMechEyeDeviceInfo	This struct defines device information
CPointCloudProcessingSettings
CPose	This struct defines rigid body transformations, including rotation matrix and translation vector
CProjectorSettings
CROI	This struct defines camera region of interest
CScanning2DSettings
CScanning3DSettings
CUhpSettings
▼Neye
►Nlaser_setting
CFramePartitionCount
CFrameRange
CFringeCodingMode
CPowerLevel
CProcessingMode
►Npointcloud_processing_setting
CDistortionCorrection
CEdgeArtifactRemoval
CEdgePreservation
CEnableDistortionCorrection
CFringeContrastThreshold
CFringeMinThreshold
CGapFilling
CNoiseRemoval
COutlierRemoval
CSurfaceSmoothing
►Nprojector_setting
CAntiFlickerMode
CFringeCodingMode
CPowerLevel
CProcessingMode
►Nscanning2d_setting
CAutoExposureROI
CDepthSourceExposureMode
CDepthSourceExposureTime
CExpectedGrayValue
CExposureMode
CExposureTime
CFlashAcquisitionMode
CFlashExposureTime
CGain
CHDRExposureSequence
CSharpenFactor
CToneMappingEnable
►Nscanning3d_setting
CDepthRange
CExposureSequence
CGain
CROI
►Nuhp_setting
CCaptureMode
CArray2D	Represents a 2D container of data
CBoolParameter	Represents a _Bool-type device parameter
CCamera	Operates the camera. Use Camera::connect to connect an available camera, and then call the corresponding methods to perform data acquisition, configure parameters, and so on
CCameraDistortion	Describes the distortion parameters
►CCameraEvent	The camera event related. Use CameraEvent::getSupportedEvents to get supported events. Use CameraEvent::registerCameraEventCallback to register an event of interest
CEventInfo	Describes the event information
►CPayloadMember	Describes the data member of the event's payload
CMemberValue
CCameraInfo	Defines the camera information
CCameraIntrinsics	Defines the 3D camera intrinsic parameters, including the intrinsic parameters of the texture 2D camera, the intrinsic parameters of the depth 2D camera(s), and the transformation between them
CCameraMatrix	Describes the camera intrinsic parameter matrix
CCameraResolutions	Defines the camera image resolutions, including the resolutions of the 2D image (texture) and depth map
CCameraStatus	Describes the camera's statuses
CColorBGR	Represents a pixel in Color2DImage with blue, green, and red channel information
CDeviceTemperature	Describes the device temperatures
CEnumParameter	Represents an _Enum-type device parameter
CErrorStatus	Describes the types of errors
CEventData	Represents data associated with a camera event
CFloatArrayParameter	Represents a _FloatArray-type device parameter
CFloatParameter	Represents a _Float-type device parameter
CFrame2D	Represents the 2D capture result, which can be obtained by calling Camera::capture2D. The 2D data can be in the form of Gray or ColorBGR and is stored in a 2D array, with each element in the array representing an image pixel
CFrame2DAnd3D	Represents the 2D and 3D capture results, which can be obtained by calling Camera::capture2DAnd3D. The 3D data can be in the form of PointZ or PointXYZ and is stored in a 2D array, with each element in the array representing a point. The class also provides methods for saving the point cloud data to a local file
CFrame3D	Represents the 3D capture result, which can be obtained by calling Camera::capture3D. The 3D data can be in the form of PointZ or PointXYZ and is stored in a 2D array, with each element in the array representing a point. The class also provides methods for saving the point cloud data to a local file
CFrameTransformation	Defines the rigid body transformations from one reference frame to another, including the rotation matrix and translation vector
CGray	Represents a pixel in GrayScale2DImage with grayscale channel information
►CHandEyeCalibration
CTransformation	Defines rigid body transformations, including translation vector and quaternion vector
CIntParameter	Represents an _Int-type device parameter
CIntrinsics2DCamera	Describes the intrinsic parameters of the 2D camera in the 3D camera based on the pinhole camera model, including the camera matrix and camera distortion parameters
CNormalVector	The pixel element struct with the normal vector coordinate (x, y, z) information
CParameter	Represents a parameter of the device
CPointXYZ	Represents a point in UntexturedPointCloud with the coordinate (x, y, z) information
CPointXYZBGR	Represents a point in TexturedPointCloud with the coordinate (x, y, z) and texture (blue, green, red, and transparency) information
CPointXYZBGRWithNormals	The pixel element struct in TexturedPointCloudWithNormals with the coordinate (x, y, z), texture (blue, green, red and transparency), and normal vector coordinate (x, y, z and curvature) information
CPointXYZWithNormals	The pixel element struct in UntexturedPointCloudWithNormals with the coordinate (x, y, z) and normal vector coordinate (x, y, z, curvature) information
CPointZ	Represents a point in DepthMap with the depth (z-coordinate) information
CProfileROI	Describes the region of interest (ROI) of a laser profiler
CProfileRoiParameter	Represents an _ProfileRoi-type device parameter
CRange	Describes a value range
CRangeParameter	Represents a _Range-type device parameter
CROI	Describes a region of interest (ROI)
CRoiArrayParameter	Represents an _RoiArray-type device parameter
CRoiParameter	Represents an _Roi-type device parameter
CSize	Describes a two-dimensional size with a width and a height
CSizeF	Describes a two-dimensional size with a width and a height using double-precision floating-point numbers
CTransformation	Defines the rigid body transformations, including rotation matrix and translation vector
CUserSet
CUserSetManager	Manages device user sets
CVersion	Describes the version information
CVirtualUserSet