Camera Parameters Supported for GenICam

This topic describes the camera parameters provided by the camera for GenICam, which indicates the features and functions provided by the camera.

Supported Camera Parameters

For descriptions and explanations of camera parameters supported for GenICam, download and read Parameters in GenICam Client.

Correspondence Between Camera Parameters Supported for GenICam and By Mech-Eye Viewer

Camera parameters supported for GenICam generally correspond with those provided by Mech-Eye Viewer. Mech-Eye Viewer provides more detailed information such as parameter descriptions and parameter values. You can use these information to assist you to adjust parameters in GenICam clients.

The following table provides the correspondence between camera parameters supported in GenICam clients and Mech-Eye Viewer:

Parameter in GenICam Client	Parameter in Mech-Eye Viewer	Visibility	Specific to Model
Scan2DROIHeight	2D Parameters - Auto-Exposure ROI	Beginner
Scan2DROILeft
Scan2DROITop
Scan2DROIWidth
Scan2DExposureMode	2D Parameters - Exposure Mode - Color Camera Exposure Mode	Beginner
Scan2DExpectedGrayValue	2D Parameters - Gray Value	Beginner
Scan2DHDRExposureSequence	2D Parameters - Exposure Sequence	Beginner
Scan2DToneMappingEnable	2D Parameters - Tone Mapping	Beginner
Scan2DExposureTime	2D Parameters - Exposure Time	Beginner
Scan2DSharpenFactor	2D Parameters - Sharpen Factor	Guru
Scan2DPatternRoleExposureMode	2D Parameters - Monochrome Camera Exposure Mode	Beginner	LSR L (V4) DEEP (V4)
Scan2DPatternRoleExposureTime	2D Parameters - Monochrome Camera Exposure Time	Beginner
Scan3DROIHeight	ROI	Beginner
Scan3DROILeft
Scan3DROITop
Scan3DROIWidth
ProjectorLightColor	3D Parameters - Projector — Light Color	Guru	Pro M Enhanced (V3) Pro S Enhanced (V3) Log M (V3) Log S (V3)
ProjectorPowerLevel	3D Parameters - Projector — Light Brightness	Expert	DLP cameras
ProjectorFringeCodingMode	3D Parameters - Projector — Fringe Coding Mode	Expert	Nano (V3) Pro XS (V3) PRO M and PRO S (V4)
AntiFlickerMode	3D Parameters - Projector — Anti-Flicker Mode	Expert	PRO M and PRO S (V4) NANO (V4)
ProjectorSelectionMode	3D Parameters - Projector — Projector Selection Mode	Guru	Deep (V3) Pro L Enhanced (V3)
ProjectorSelector	3D Parameters - Projector — Projector Selector	Guru
LaserFringeCodingMode	3D Parameters - Laser — Fringe Coding Mode	Expert	Laser L (V3) Laser L Enhanced (V3) LSR L (V4) DEEP (V4)
LaserPowerLevel	3D Parameters - Laser — Laser Power	Expert
LaserFrameAmplitude	3D Parameters - Laser Projection Frame Control — Laser Frame Amplitude	Guru
LaserFrameOffset	3D Parameters - Laser Projection Frame Control — Laser Frame Offset	Guru
LaserFramePartitionCount	3D Parameters - Laser Projection Frame Control — Laser Frame Partition Count	Guru
Scan3DBinningEnable	3D Parameters - 3D Binning	Guru	Pro L Enhanced (V3) Laser L Enhanced (V3)
Scan3DExposureCount	3D Parameters - Exposure Multiplier	Beginner
Scan3DExposureTime	3D Parameters - Exposure Time	Beginner
Scan3DExposureTime2	3D Parameters - Exposure Time 2	Beginner
Scan3DExposureTime3	3D Parameters - Exposure Time 3	Beginner
Scan3DGain	3D Parameters - Gain	Expert
FringeCodingMode	3D Parameters - UHP — FringeCodingMode	Guru	UHP-140
UhpCaptureMode	3D Parameters - UHP — Capture Mode	Beginner	UHP-140
AcquisitionMode	and	-
DepthLowerLimit	Depth Range	Beginner
DepthUpperLimit
DeviceScanType	-	-
CloudOutlierFilterMode	Point Cloud Processing - Outlier Removal	Beginner
CloudSmoothMode	Point Cloud Processing - Point Cloud Smoothing	Beginner
FringeContrastThreshold	Point Cloud Processing - Stripe Contrast Threshold	Beginner
FringeMinThreshold	Point Cloud Processing - Minimum Fringe Intensity Threshold	Guru
UserSetDefault	-	-
UserSetSelector	Parameter Group drop-down menu	-