Sort and Stratify¶
Function¶
This Step sorts and stratifies the input data according to the specified rules, moves the original indices of the data according to the sorting and stratifying process, and outputs the processed data and indices, and sort and stratification indices.
If the multidimensional data is input, each array of the last dimension of the data will be processed independently in turn.
Usage Scenario¶
This Step is used for multidimensional sorting. This Step can be used with other Steps to sort the specified dimension of the data.
Input and Output¶
The input data to be processed is shown in the table below:
Data to Be Processed |
[[30, 10, 20], [20, 10]] |
Original Indices of Data |
[[4, 5, 6], [3, 2]] |
The output data after processing is shown in the table below:
Processed Data |
[[[10], [20], [30]], [[10], [20]]] |
Processed Data Indices |
[[[5], [6], [4]],[[2], [3]]] |
Sort and Stratification Indices |
[[[1], [2], [0]], [[1], [0]]] |
Parameter Description¶
- Ascending
- Description: This parameter specifies whether to sort the data by ascending or descending order. Select to sort the data by ascending order, or else by descending order.Default value: Selected
- Layer Interval
- Description: This parameter specifies the layer interval for the stratification.Default value: 0.0500
- Starting Point of Each Stratum
- Description: This parameter specifies the starting point of each stratum for the stratification.Value list: End of Previous Stratum Range, First Number of This Stratum
End of Previous Stratum Range: The ranges of the strata are connected end to end and do not depend on the data. There will be no spacing between strata.
First Number of This Stratum: Where the range of each stratum lies depends on the data. There will be spacing between strata, and the spacing will be larger if the numbers in the data are wide apart.
Default value: End of Previous Stratum Range