mmind::eye::trigger_settings::TriggerDelay Class Reference

Static Public Attributes
static constexpr const char *	name = "TriggerDelay"
static constexpr const char *	description
static constexpr Parameter::Type	type = Parameter::Type::_Int
static constexpr const char *	unit = "us"

Detailed Description

Definition at line 142 of file ScanParameters.h.

Member Data Documentation

description

const char* mmind::eye::trigger_settings::TriggerDelay::description

staticconstexpr

Initial value:

                                    =
"This parameter is only effective for firmware 2.4.0 and above.\n"
"Set the delay time between receiving a line scan trigger signal and emitting laser "
"light.\n\n"
"Note:\n"
"* Only adjust this parameter in the following situation: Multiple laser profilers are "
"used to scan the same target object, and their FOVs overlap. The laser profilers will "
"interfere with each other if they emit laser light at the same time.\n"
"* Increasing this parameter will reduce the max scan rate.\n"
"* The laser profiler starts exposure 10 μs after emitting laser light to ensure stable "
"brightness of the laser lines in the raw image."

Definition at line 147 of file ScanParameters.h.

name

const char* mmind::eye::trigger_settings::TriggerDelay::name = "TriggerDelay"

staticconstexpr

Definition at line 145 of file ScanParameters.h.

type

Parameter::Type mmind::eye::trigger_settings::TriggerDelay::type = Parameter::Type::_Int

staticconstexpr

Definition at line 159 of file ScanParameters.h.

unit

const char* mmind::eye::trigger_settings::TriggerDelay::unit = "us"

staticconstexpr

Definition at line 161 of file ScanParameters.h.

---

The documentation for this class was generated from the following file:

• profiler/parameters/ScanParameters.h