mmind::eye::profile_extraction::MaxSpotIntensity Class Reference

Static Public Attributes
static constexpr const char *	name = "MaxSpotIntensity"
static constexpr const char *	description
static constexpr Parameter::Type	type = Parameter::Type::_Int

Detailed Description

Definition at line 72 of file ProfileExtractionParameters.h.

Member Data Documentation

description

const char* mmind::eye::profile_extraction::MaxSpotIntensity::description

staticconstexpr

Initial value:

                                    =
"This parameter is only effective for firmware 2.2.1 and below."
"For firmware 2.3.0 and above, adjustment of this parameter does not take effect.\n"
"Set the maximum intensity for the spots. Spots with intensity values greater than this "
"value will be excluded. The intensity of a spot is the average grayscale value of all the "
"valid pixels in the pixel column of the laser line.\nSetting an appropriate maximum "
"intensity can remove abnormally bright spots produced by specular reflection.\n\nNote: "
"The minimum value of \"Max Spot Intensity\" is affected by \"Min Grayscale Value\"."

Definition at line 77 of file ProfileExtractionParameters.h.

name

const char* mmind::eye::profile_extraction::MaxSpotIntensity::name = "MaxSpotIntensity"

staticconstexpr

Definition at line 75 of file ProfileExtractionParameters.h.

type

Parameter::Type mmind::eye::profile_extraction::MaxSpotIntensity::type = Parameter::Type::_Int

staticconstexpr

Definition at line 86 of file ProfileExtractionParameters.h.

---

The documentation for this class was generated from the following file:

• profiler/parameters/ProfileExtractionParameters.h