TriggerDelay Class Reference

#include <ScanParameters.h>

Static Public Attributes
static constexpr const char *	name = "TriggerDelay"
static constexpr const char *	description
static constexpr Parameter::Type	type = Parameter::Type::_Int
static constexpr const char *	unit = "us"

Field Documentation

description

constexpr const char* description

staticconstexpr

Initial value:

=
        "This parameter is only effective for firmware 2.4.0 and above.\n"
        "Set the delay time between receiving a line scan trigger signal and emitting laser "
        "light.\n\n"
        "Note:\n"
        "* Only adjust this parameter in the following situation: Multiple laser profilers are "
        "used to scan the same target object, and their FOVs overlap. The laser profilers will "
        "interfere with each other if they emit laser light at the same time.\n"
        "* Increasing this parameter will reduce the max scan rate.\n"
        "* The laser profiler starts exposure 10 μs after emitting laser light to ensure stable "
        "brightness of the laser lines in the raw image."

name

constexpr const char* name = "TriggerDelay"

staticconstexpr

type

constexpr Parameter::Type type = Parameter::Type::_Int

staticconstexpr

unit

constexpr const char* unit = "us"

staticconstexpr

---

The documentation for this class was generated from the following file:

• profiler/parameters/ScanParameters.h