Class List

Here are the classes, structs, unions and interfaces with brief descriptions:

[detail level 1234]

▼Nmmind
▼Neye
▼Nlaser_setting
CFramePartitionCount
CFrameRange
CFringeCodingMode
CPowerLevel
▼Npointcloud_processing_setting
CDistortionCorrection
CEdgePreservation
CEnableDistortionCorrection
CFringeContrastThreshold
CFringeMinThreshold
CGapFilling
CNoiseRemoval
COutlierRemoval
CSurfaceSmoothing
▼Nprojector_setting
CAntiFlickerMode
CFringeCodingMode
CPowerLevel
▼Nscanning2d_setting
CAutoExposureROI
CDepthSourceExposureMode
CDepthSourceExposureTime
CExpectedGrayValue
CExposureMode
CExposureTime
CHDRExposureSequence
CSharpenFactor
CToneMappingEnable
▼Nscanning3d_setting
CDepthRange
CExposureSequence
CGain
CROI
▼Nuhp_setting
CCaptureMode
CArray2D	Represents a 2D container of data
CBoolParameter	Represents a _Bool-type device parameter
CCamera	Operates the Mech-Eye Industrial 3D Cameras. Use Camera::connect to connect an available camera, and then you can use the camera to capture 2D and 3D frames, configure parameters and so on
CCameraDistortion	Describes the distortion parameters
CCameraEvent	The camera event related. Use CameraEvent::registerCameraEventCallback to register an event of interest
CCameraInfo	Defines the camera information
CCameraIntrinsics	Defines the 3D camera intrinsic, including the texture source camera, depth source camera and the transformation between then
CCameraMatrix	Describes the camera intrinsic matrix
CCameraResolutions	Defines the camera resolutions information, including texture image resolution and depth map resolution
CCameraStatus	Describes the camera running status
CColorBGR	The pixel element struct in Color2DImage with blue, green, and red information
CDeviceTemperature	Describes the device temperature information
CEnumParameter	Represents an _Enum-type device parameter
CErrorStatus	Describes the types of errors
CFloatArrayParameter	Represents a _FloatArray-type device parameter
CFloatParameter	Represents a _Float-type device parameter
CFrame2D	Represents the 2D scanning result, which can be obtained by calling Camera::capture2D. Use a 2D array to represent it while each pixel represents its corresponding 2D data. The 2D data can be in the form of Gray and ColorBGR
CFrame2DAnd3D	Represents the 2D and 3D scanning result, which can be obtained by calling Camera::capture2DAnd3D or Camera.captureAll2D3DWithNormal. Use a 2D array to represent it while each pixel represents its corresponding 3D data. The 3D data can be in the form of PointZ, PointXYZ, and PointXYZWithNormal. The class supports saving 3D point cloud data to the file
CFrame3D	Represents the 3D scanning result, which can be obtained by calling Camera::capture3D or Camera::capture3DWithNormal. Use a 2D array to represent it while each pixel represents its corresponding 3D data. The 3D data can be in the form of PointZ, PointXYZ, PointXYZWithNormal. The class supports saving 3D point cloud data to the file
CGray	The pixel element struct in GrayScale2DImage with gray information
▼CHandEyeCalibration
CTransformation	Defines rigid body transformations, including translation vector and quaternion vector
CIntParameter	Represents an _Int-type device parameter
CIntrinsics2DCamera	Describes the 2D camera intrinsics mounted on the device represented in the pinhole camera model, including camera matrix and camera distortion parameters
CNormalVector	The pixel element struct with normal vector X, Y, and Z information
CParameter	Represents a parameter of the device
CPointXYZ	The pixel element struct in UntexturedPointCloud with X, Y, and Z information
CPointXYZBGR	The pixel element struct in TexturedPointCloud with X, Y, Z, blue, green, and red information
CPointXYZBGRWithNormals	The pixel element struct in TexturedPointCloudWithNormals with X, Y, Z, blue, green, red, normalX, normalY, and normalZ information
CPointXYZWithNormals	The pixel element struct in UntexturedPointCloudWithNormals with X, Y, Z, normalX, normalY, and normalZ information
CPointZ	The pixel element struct in DepthMap with Z information
CRange	Describes a value range
CRangeParameter	Represents a _Range-type device parameter
CROI	Describes a region of interest (ROI)
CRoiParameter	Represents an _Roi-type device parameter
CSize	Describes a size with a width and a height
CTransformation	Defines the rigid body transformations, including rotation matrix and translation vector
CUserSet
CUserSetManager	Manages device user sets
CVersion	Describes the version information