Camera Parameters Supported for GenICam¶
This topic describes the camera parameters provided by the camera for GenICam, which indicates the features and functions provided by the camera.
Supported Camera Parameters¶
For descriptions and explanations of camera parameters supported for GenICam, download and read Parameters in GenICam Client.
Correspondence Between Camera Parameters Supported for GenICam and By Mech-Eye Viewer¶
Camera parameters supported for GenICam generally correspond with those provided by Mech-Eye Viewer. Mech-Eye Viewer provides more detailed information such as parameter descriptions and parameter values. You can use these information to assist you to adjust parameters in GenICam clients.
The following table provides the correspondence between camera parameters supported in GenICam clients and Mech-Eye Viewer:
Parameter in GenICam Client |
Parameter in Mech-Eye Viewer |
Visibility |
Specific to Model |
Scan2DROIHeight |
2D Parameters - Auto-Exposure ROI |
Beginner |
|
Scan2DROILeft |
|||
Scan2DROITop |
|||
Scan2DROIWidth |
|||
Scan2DExposureMode |
2D Parameters - Exposure Mode - 2D Image (Texture) Exposure Mode |
Beginner |
|
Scan2DExpectedGrayValue |
2D Parameters - Gray Value |
Beginner |
|
Scan2DHDRExposureSequence |
2D Parameters - Exposure Sequence |
Beginner |
|
Scan2DToneMappingEnable |
2D Parameters - Tone Mapping |
Beginner |
|
Scan2DExposureTime |
2D Parameters - Exposure Time |
Beginner |
|
Scan2DSharpenFactor |
2D Parameters - Sharpen Factor |
Guru |
|
Scan2DPatternRoleExposureMode |
2D Parameters - 2D Image (Depth Source) Exposure Mode |
Beginner |
LSR L (V4) DEEP (V4) |
Scan2DPatternRoleExposureTime |
2D Parameters - 2D Image (Depth Source) Exposure Time |
Beginner |
|
Scan3DROIHeight |
Beginner |
||
Scan3DROILeft |
|||
Scan3DROITop |
|||
Scan3DROIWidth |
|||
ProjectorLightColor |
3D Parameters - Projector — Light Color |
Guru |
Pro M Enhanced (V3) Pro S Enhanced (V3) Log M (V3) Log S (V3) |
ProjectorPowerLevel |
3D Parameters - Projector — Light Brightness |
Expert |
DLP cameras |
ProjectorFringeCodingMode |
3D Parameters - Projector — Fringe Coding Mode |
Expert |
Nano (V3) Pro XS (V3) PRO M and PRO S (V4) |
AntiFlickerMode |
3D Parameters - Projector — Anti-Flicker Mode |
Expert |
PRO M and PRO S (V4) NANO (V4) |
ProjectorSelectionMode |
3D Parameters - Projector — Projector Selection Mode |
Guru |
Deep (V3) Pro L Enhanced (V3) |
ProjectorSelector |
3D Parameters - Projector — Projector Selector |
Guru |
|
LaserFringeCodingMode |
3D Parameters - Laser — Fringe Coding Mode |
Expert |
Laser L (V3) Laser L Enhanced (V3) LSR L (V4) DEEP (V4) |
LaserPowerLevel |
3D Parameters - Laser — Laser Power |
Expert |
|
LaserFrameAmplitude |
3D Parameters - Laser Projection Frame Control — Laser Frame Amplitude |
Guru |
|
LaserFrameOffset |
3D Parameters - Laser Projection Frame Control — Laser Frame Offset |
Guru |
|
LaserFramePartitionCount |
3D Parameters - Laser Projection Frame Control — Laser Frame Partition Count |
Guru |
|
Scan3DBinningEnable |
3D Parameters - 3D Binning |
Guru |
Pro L Enhanced (V3) Laser L Enhanced (V3) |
Scan3DExposureCount |
3D Parameters - Exposure Multiplier |
Beginner |
|
Scan3DExposureTime |
3D Parameters - Exposure Time |
Beginner |
|
Scan3DExposureTime2 |
3D Parameters - Exposure Time 2 |
Beginner |
|
Scan3DExposureTime3 |
3D Parameters - Exposure Time 3 |
Beginner |
|
Scan3DGain |
3D Parameters - Gain |
Expert |
|
FringeCodingMode |
3D Parameters - UHP — FringeCodingMode |
Guru |
UHP-140 |
UhpCaptureMode |
3D Parameters - UHP — Capture Mode |
Beginner |
UHP-140 |
AcquisitionMode |
- |
||
DepthLowerLimit |
Beginner |
||
DepthUpperLimit |
|||
DeviceScanType |
- |
- |
|
PointCloudSurfaceSmoothing |
Point Cloud Processing - Surface Smoothing |
Beginner |
|
PointCloudOutlierRemoval |
Point Cloud Processing - Outlier Removal |
Beginner |
|
PointCloudNoiseRemoval |
Point Cloud Processing - Noise Removal |
Beginner |
|
PointCloudEdgePreservation |
Point Cloud Processing - Edge Preservation |
Beginner |
|
FringeContrastThreshold |
Point Cloud Processing - Stripe Contrast Threshold |
Beginner |
|
FringeMinThreshold |
Point Cloud Processing - Minimum Fringe Intensity Threshold |
Guru |
|
UserSetDefault |
- |
- |
|
UserSetSelector |
Parameter Group drop-down menu |
- |