ScanParameters.h

/*******************************************************************************
 *BSD 3-Clause License
 *
 *Copyright (c) 2016-2025, Mech-Mind Robotics Technologies Co., Ltd.
 *All rights reserved.
 *
 *Redistribution and use in source and binary forms, with or without
 *modification, are permitted provided that the following conditions are met:
 *
 *1. Redistributions of source code must retain the above copyright notice, this
 *   list of conditions and the following disclaimer.
 *
 *2. Redistributions in binary form must reproduce the above copyright notice,
 *   this list of conditions and the following disclaimer in the documentation
 *   and/or other materials provided with the distribution.
 *
 *3. Neither the name of the copyright holder nor the names of its
 *   contributors may be used to endorse or promote products derived from
 *   this software without specific prior written permission.
 *
 *THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 *AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 *IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 *DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 *FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 *DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 *SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 *CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 *OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 *OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 ******************************************************************************/
 
#pragma once
#include "Parameter.h"
 
namespace mmind {
 
namespace eye {
 
namespace trigger_settings {
class DataAcquisitionMethod
{
public:
    static constexpr const char* name = "DataAcquisitionMethod";
 
    static constexpr const char* description =
        "This parameter determines how to generate data.\n\nFrame_Based: Generates one intensity "
        "image and one depth map each time data acquisition is triggered.\nNonStop: Continuously "
        "scans the target object and returns fixed-length data segments after data acquisition is "
        "triggered.\n\nNote:\n* The length of the intensity image and depth map or the data "
        "segment is set by the \"ScanLineCount\" parameter in the \"scan_settings\" namespace.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Enum;
 
    enum struct Value {
        Frame_Based = 0,
        Nonstop = 1,
    };
};
 
class DataAcquisitionTriggerSource
{
public:
    static constexpr const char* name = "DataAcquisitionTriggerSource";
 
    static constexpr const char* description =
        "Select the source of the signals that trigger the scan of a single frame.\nIf you use "
        "external input signal to trigger scanning, select \"External\".\nIf you need to trigger "
        "scanning with software, select \"Software\".";
 
    static constexpr Parameter::Type type = Parameter::Type::_Enum;
 
    enum struct Value {
        Software,
        External,
    };
};
 
class LineScanTriggerSource
{
public:
    static constexpr const char* name = "LineScanTriggerSource";
 
    static constexpr const char* description =
        "Select the source of the signals that trigger the scan of a single line.\nIf you use "
        "encoder to trigger scanning, select \"Encoder\".\nIf you need to trigger scanning at a "
        "fixed rate, select \"FixedRate\" and adjust \"SoftwareTriggerRate\".";
 
    static constexpr Parameter::Type type = Parameter::Type::_Enum;
 
    enum struct Value {
        FixedRate,
        Encoder,
    };
};
 
class SoftwareTriggerRate
{
public:
    static constexpr const char* name = "SoftwareTriggerRate";
 
    static constexpr const char* description =
        "When \"LineScanTriggerSource\" is set to \"FixedRate\", set the fixed rate at which "
        "the laser profiler is triggered to scan.\n\nThe maximum value of this parameter is the "
        "current \"MaxScanRate\". \"SoftwareTriggerRate\" is unavailable when "
        "\"LineScanTriggerSource\" is set to \"Encoder\".";
 
    static constexpr Parameter::Type type = Parameter::Type::_Float;
 
    static constexpr const char* unit = "Hz";
};
 
class MaxScanRate
{
public:
    static constexpr const char* name = "MaxScanRate";
 
    static constexpr const char* description =
        "The maximum scan rate that the laser profiler can reach. The maximum scan rate is "
        "affected by the following parameters: \"ExposureTime\", \"ZDirectionRoi\", and "
        "\"TriggerDelay\"";
 
    static constexpr Parameter::Type type = Parameter::Type::_Float;
 
    static constexpr const char* unit = "Hz";
};
 
class TriggerDelay
{
public:
    static constexpr const char* name = "TriggerDelay";
 
    static constexpr const char* description =
        "This parameter is only effective for firmware 2.4.0 and above.\n"
        "Set the delay time between receiving a line scan trigger signal and emitting laser "
        "light.\n\n"
        "Note:\n"
        "* Only adjust this parameter in the following situation: Multiple laser profilers are "
        "used to scan the same target object, and their FOVs overlap. The laser profilers will "
        "interfere with each other if they emit laser light at the same time.\n"
        "* Increasing this parameter will reduce the max scan rate.\n"
        "* The laser profiler starts exposure 10 μs after emitting laser light to ensure stable "
        "brightness of the laser lines in the raw image.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Int;
 
    static constexpr const char* unit = "us";
};
 
class EncoderTriggerDirection
{
public:
    static constexpr const char* name = "EncoderTriggerDirection";
 
    static constexpr const char* description =
        "Select the encoder motion direction that triggers scanning.\nChannelALeading: Scanning "
        "is triggered when channel A is leading.\nChannelBLeading: Scanning is triggered when "
        "channel B is leading. \nBoth: Scanning is triggered when either channel A or channel B is "
        "leading.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Enum;
 
    enum struct Value {
        ChannelALeading,
        ChannelBLeading,
        Both,
    };
};
 
class EncoderTriggerSignalCountingMode
{
public:
    static constexpr const char* name = "EncoderTriggerSignalCountingMode";
 
    static constexpr const char* description =
        "Set the number of signals to be counted in an encoder cycle. Counted signals are used to "
        "trigger scanning.\nNote: This parameter affects the adjustment of "
        "\"EncoderTriggerInterval\".\n\nMultiple_1: counts 1 signal in an encoder "
        "cycle.\nMULTIPLE_2: counts 2 signals in an encoder cycle.\nMULTIPLE_4: counts 4 signals "
        "in an encoder cycle.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Enum;
 
    enum struct Value {
        Multiple_1,
        Multiple_2,
        Multiple_4,
    };
};
 
class EncoderTriggerInterval
{
public:
    static constexpr const char* name = "EncoderTriggerInterval";
 
    static constexpr const char* description =
        "Set the number of trigger signals needed for scanning one line.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Int;
};
} // namespace trigger_settings
 
namespace scan_settings {
 
class ScanLineCount
{
public:
    static constexpr const char* name = "ScanLineCount";
 
    static constexpr const char* description =
        "Set the number of profiles in the acquired data.\n\nWhen the \"DataAcquisitionMethod\" "
        "parameter in the \"trigger_settings\" namespace is set to \"Frame_Based\", this "
        "parameter sets the number of profiles needed to generate one intensity image/depth "
        "map.\nMake sure that the set value can cover one target object completely.\n\nWhen the "
        "\"DataAcquisitionMethod\" parameter in the \"trigger_settings\" namespace is set to "
        "\"Nonstop\", this parameter sets the length of the returned data segments.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Int;
};
 
class DataPointsPerProfile
{
public:
    static constexpr const char* name = "DataPointsPerProfile";
 
    static constexpr const char* description = "The number of data points in a profile.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Int;
 
    static constexpr const char* unit = "";
};
 
class ExposureDelay
{
public:
    static constexpr const char* name = "ExposureDelay";
 
    static constexpr const char* description =
        "This parameter is only effective for firmware 2.3.4 and below.\nSet the delay time "
        "between laser emission and start of exposure.\n\nLarger exposure delay "
        "results in more stable brightness of the laser lines in the raw image, thus more stable "
        "quality of the intensity image and depth map. However, the \"MaxScanRate\" will be "
        "reduced.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Int;
 
    static constexpr const char* unit = "us";
};
 
class BatchRetrievalTimeout
{
public:
    static constexpr const char* name = "BatchRetrievalTimeout";
 
    static constexpr const char* description =
        "Set the timeout period for retrieving a batch of data. If no batches are available for "
        "retrieval within the set timeout period, the current round of data acquisition is "
        "automatically stopped.\nFor firmware version 2.4.1 and below, this timeout should be at "
        "least the time required to scan 16 lines. For firmware version 2.5.0 and above, it should "
        "be at least the time needed to scan a single line. If line scan is triggered at a slow "
        "rate, increase this parameter.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Int;
 
    static constexpr const char* unit = "ms";
};
 
class CallbackRetrievalTimeout
{
public:
    static constexpr const char* name = "CallbackRetrievalTimeout";
 
    static constexpr const char* description =
        "Set the timeout period for retrieving data when using a callback function. If none or "
        "only some of the data is retrieved within the set timeout period, the current round of "
        "data acquisition is automatically stopped. The amount of data to be retrieved is "
        "determined by the \"ScanLineCount\" parameter.\nA value of 0 or -1 corresponds to an "
        "infinite timeout period.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Int;
 
    static constexpr const char* unit = "ms";
};
 
} // namespace scan_settings
 
namespace point_cloud_resolutions {
class XAxisResolution
{
public:
    static constexpr const char* name = "XAxisResolution";
 
    static constexpr const char* description =
        "Sets the scan data resolution in the X direction, which is the distance between two "
        "neighboring points along the direction of the laser line.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Float;
 
    static constexpr const char* unit = "um";
};
 
class YResolution
{
public:
    static constexpr const char* name = "YResolution";
 
    static constexpr const char* description =
        "Sets the point cloud resolution in the Y-axis direction, which is the distance between "
        "two neighboring points along the travel direction of the target object.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Float;
 
    static constexpr const char* unit = "um";
};
} // namespace point_cloud_resolutions
 
namespace correction {
class EnableTiltCorrection
{
public:
    static constexpr const char* name = "EnableTiltCorrection";
 
    static constexpr const char* description =
        "Enable this parameter to apply the tilt correction result to the profile. Acquire data "
        "again to see the effect.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Bool;
};
 
class EnableHeightCorrection
{
public:
    static constexpr const char* name = "EnableHeightCorrection";
 
    static constexpr const char* description =
        "Enable this parameter to apply the height correction result to the profile. Acquire data "
        "again to see the effect.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Bool;
};
 
class TiltCorrectionAngle
{
public:
    static constexpr const char* name = "TiltCorrectionAngle";
 
    static constexpr const char* description = "Correct the tilt of the profile around the Y-axis.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Float;
 
    static constexpr const char* unit = "degree";
};
 
class HeightCorrectionRatio
{
public:
    static constexpr const char* name = "HeightCorrectionRatio";
 
    static constexpr const char* description = "Correct the Z values of the profile.";
 
    static constexpr Parameter::Type type = Parameter::Type::_Float;
};
} // namespace correction
 
namespace transformation {
class CoordinateTransformation
{
public:
    static constexpr const char* name = "CoordinateTransformation";
 
    static constexpr const char* description =
        "The CoordinateTransformation, which represents the transformation matrix from the "
        "camera coordinate system to a custom coordinate system. It can change the xyz values of "
        "the point cloud.";
 
    static constexpr Parameter::Type type = Parameter::Type::_FloatArray;
};
} // namespace transformation
 
} // namespace eye
} // namespace mmind